24V & 12V Motor for Automotive Door Locks | Reliable Performance

ENEN

Get in touch

12v home appliance motor

Jixin Motor has been working in the field of automotive door lock block motors for more than ten years. We have enough production experience to fulfill every order from our customers and our quality control has been very stable. Most of our clients are still in close contact with us and have been working with us since they first met us. Just find us and our products will satisfy you. Parameter Specification Operating Voltage 12 V DC (Nominal); Range: 10V - 14V Direction Reversible Polarity Stroke [e.g., 10mm ± 2mm] or [e.g., 90-degree rotation] Load Current < 5A (Stall current typically higher) Operating Temperature -40°C to +85°C (-40°F to +185°F) Duty Cycle Intermittent (e.g., 10 seconds ON, 50 seconds OFF) Connector Type OEM-specific (e.g., 2-pin or 3-pin connector) Gear Material Engineered Thermoplastic or Nylon for smooth operation and noise reduction Housing Material ABS Plastic or PC, resistant to automotive fluids and UV exposure Mounting Bolt-on or clip-in, model-specific
Get A Quote

Corporate Strengths

Specialty Steel Sheets

Automatic hardware stamping molding, high precision, good copper core degree, accurate size specifications.

Processing Technology

Surface plating is available, so that the motor is not easy to rust and contaminate under harsh environment.

Product Advantages

Low noise, high torque, no vibration after rotor rotation and balance.

Bearings with oil

Stainless steel bearings, ball pure copper-based, red copper-based, and other diversified bearings, formulated according to customer needs.

24V motor in a locking

280-626 card door lock motor VIEW DETAILS

280-626 card door lock motor

JXF130-585 12v motor used in car mirror VIEW DETAILS

JXF130-585 12v motor used in car mirror

JXF130-625 car mirror motor 12v with high speed factory VIEW DETAILS

JXF130-625 car mirror motor 12v with high speed factory

JXF280-71 12v micro dc motor for car door actuator VIEW DETAILS

JXF280-71 12v micro dc motor for car door actuator

Parameter Specification
Operating Voltage 12 V DC (Nominal); Range: 10V - 14V
Direction Reversible Polarity
Stroke [e.g., 10mm ± 2mm] or [e.g., 90-degree rotation]
Load Current < 5A (Stall current typically higher)
Operating Temperature -40°C to +85°C (-40°F to +185°F)
Duty Cycle Intermittent (e.g., 10 seconds ON, 50 seconds OFF)
Connector Type OEM-specific (e.g., 2-pin or 3-pin connector)
Gear Material Engineered Thermoplastic or Nylon for smooth operation and noise reduction
Housing Material ABS Plastic or PC, resistant to automotive fluids and UV exposure
Mounting Bolt-on or clip-in, model-specific

Why choose us?

Jixin Motor has been working in the field of automotive door lock block motors for more than ten years. We have enough production experience to fulfill every order from our customers and our quality control has been very stable.

Supplier highlights

Package the micro motors that have passed quality inspections using appropriate packaging materials and methods to prevent damage during transportation. Prepare shipping lists and relevant documents, arrange logistics transportation, and deliver the micro motors to customers.
Process the purchased materials through milling, turning, drilling, and other techniques to produce various components of the micro motor. •Wind the coils to ensure the number of turns and wire diameter meet the design requirements. Magnetize the magnets to ensure the magnetic field strength meets the design specifications.
CW Plastic end cap Ferrite magnet Leaf brush System Carbon steel shaft
Parameter Specification Operating Voltage 12 V DC (Nominal); Range: 10V - 14V Direction Reversible Polarity Stroke [e.g., 10mm ± 2mm] or [e.g., 90-degree rotation] Load Current < 5A (Stall current typically higher) Operating Temperature -40°C to +85°C (-40°F to +185°F) Duty Cycle Intermittent (e.g., 10 seconds ON, 50 seconds OFF) Connector Type OEM-specific (e.g., 2-pin or 3-pin connector) Gear Material Engineered Thermoplastic or Nylon for smooth operation and noise reduction Housing Material ABS Plastic or PC, resistant to automotive fluids and UV exposure Mounting Bolt-on or clip-in, model-specific
Process the purchased materials through milling, turning, drilling, and other techniques to produce various components of the micro motor. Wind the coils to ensure the number of turns and wire diameter meet the design requirements. Magnetize the magnets to ensure the magnetic field strength meets the design specifications.
Continuous Current(A) 0.13A Efficiency IE 2 Speed(RPM) 12586 Model Number JXF280-626 Place of Origin Guangdong, China Warranty 3 Months Brand Name Jixin Commutation Brush Construction Permanent Magnet Protect Feature Totally Enclosed Torque 428g.cm Type Micro Motor Usage Car, door lock actuator Packaging and delivery Selling Units Single item Single package size 4.8X2.5X1.85 cm Single gross weight 0.500 kg

Get a Free Quote

Our representative will contact you soon.
Email
Name
Company Name
Message
0/1000

2024 © Shenzhen Jixin Micro Motor Co.,Ltd  -  Privacy policy