Mini Brushless DC Motor for Automotive Door Locks | High Torque, Low Noise

ENEN

Get in touch

automotive soft close door

Jixin Motor has been working in the field of automotive door lock block motors for more than ten years. We have enough production experience to fulfill every order from our customers and our quality control has been very stable. If you have a need for automotive door lock block motors, please feel free to contact us. Most of our clients are still in close contact with us and have been working with us since they first met us. Just find us and our products will satisfy you. We adhere to the philosophy of "quality, service, integrity", striving to provide customers with high-quality, high-performance, and high-reliability micro motor products and solutions. Emphasizing technological innovation and talent development, we continuously improve product quality and customer satisfaction. Our service principles revolve around commitment and integrity.
Get A Quote

Corporate Strengths

Processing Technology

Surface plating is available, so that the motor is not easy to rust and contaminate under harsh environment.

Specialty Steel Sheets

Automatic hardware stamping molding, high precision, good copper core degree, accurate size specifications.

Product Advantages

Low noise, high torque, no vibration after rotor rotation and balance.

Bearings with oil

Stainless steel bearings, ball pure copper-based, red copper-based, and other diversified bearings, formulated according to customer needs.

Central Lock Motor

Parameter Specification
Operating Voltage 12 V DC (Nominal); Range: 10V - 14V
Direction Reversible Polarity
Stroke [e.g., 10mm ± 2mm] or [e.g., 90-degree rotation]
Load Current < 5A (Stall current typically higher)
Operating Temperature -40°C to +85°C (-40°F to +185°F)
Duty Cycle Intermittent (e.g., 10 seconds ON, 50 seconds OFF)
Connector Type OEM-specific (e.g., 2-pin or 3-pin connector)
Gear Material Engineered Thermoplastic or Nylon for smooth operation and noise reduction
Housing Material ABS Plastic or PC, resistant to automotive fluids and UV exposure
Mounting Bolt-on or clip-in, model-specific

Our Services

Why choose us?

Jixin Motor has been working in the field of automotive door lock block motors for more than ten years. We have enough production experience to fulfill every order from our customers and our quality control has been very stable.
This supplier is a manufacturer and trader, exporting mainly to Turkey, Brazil, and Russia with a positive review rate of 100.0% and 16 positive reviews.
Process the purchased materials through milling, turning, drilling, and other techniques to produce various components of the micro motor. Wind the coils to ensure the number of turns and wire diameter meet the design requirements. Magnetize the magnets to ensure the magnetic field strength meets the design specifications.
CW Plastic end cap Ferrite magnet Leaf brush System Carbon steel shaft
Specialty Steel Sheets Automatic hardware stamping molding, high precision, good copper core degree, accurate size specifications. Bearings with oil Stainless steel bearings, ball pure copper-based, red copper-based, and other diversified bearings, formulated according to customer needs.
Inner Package Usually, we use blister trays or foam sheets for the inner packaging of the motor. This allows the motor to be fixed on the plate and not to fall off loosely。 Outer Package We will use tough cow batch cartons as the outer packaging. The surface of the carton will be sealed with a layer of bubble film to waterproof it. In addition, we will also tie two compilation straps to fix it.
Our payment method is T/T (Telegraphic Transfer), with 30% required as a deposit, and the remaining balance to be paid before shipment.You can make payments either through Alibaba's payment platform or directly to our bank account.

Get a Free Quote

Our representative will contact you soon.
Email
Name
Company Name
Message
0/1000

2024 © Shenzhen Jixin Micro Motor Co.,Ltd  -  Privacy policy